Episode: Using the Reserve PRO

Join LCA’s Jonathan Clark as he demonstrates how to setup and use the Reserve PRO.

Bracket Mounting Instructions:

The Reserve PRO has 2 mounting options with 3 different mounting combinations. (Two different bow press mounting options both with table mount capabilities)

This product has a Standard and Ultimate version. The explanation below details the differences between the two available options.

Standard version attaches to: 

EZ Green, EZ Press, and EZ Press Deluxe. Power Green, Power Press, and Power Press Deluxe

Ultimate version attaches to:

Ultimate EZ Press and the Ultimate Deluxe Press

Each mounting bracket will be equipped with space filler to ensure a perfect fit inside each bow press arm. If you’re planning to mount your Reserve PRO to your bench or table top either version will work just fine. Both mounting brackets will have mounting holes, lag bolts, and washers included for use with a table or bench.

If your press is older than 2009, contact LCA before purchase.

Mounting Diagram:

TOOLS NEEDED:

7/16” wrench, socket, or nut driver for a drill.

ITEMS INCLUDED:

Reserve PRO unit, with the bracket already installed | 2 - Lag Bolts | 2 - Washers | 2 - Ring pins (for locking the wheels) | 2 - Dowel pins (for holding the string or cable loops).

Review the above diagram before installing your Reserve PRO to your table. Following this diagram will ensure that your Reserve is far enough out from your table so the handle can be turned. Always ensure you tighten the lag bolts snug, but don’t over tighten them because the bolt head can / will snap off leaving the bolts threads inside your table. Once you have your measurements made, mount your Reserve PRO using your lag bolts and provided washers.